Rikon Power Tools 25-210, Operator'S Manual

2

TABLE OF CONTENTS

SPECIFICATIONS

NOTE: 

The specifications, photographs, drawings and information in this manual represent the current 

models when the manual was prepared. Changes and improvements may be made at any time, with no 

obligation on the part of Rikon Power Tools, Inc. to modify previously delivered units. Reasonable care 

has been taken to ensure that the information in this manual is correct, to provide you with the guidelines 

for the proper safety, assembly and operation of these machines.

Motor ....................................................................................................3 HP, TEFC

Motor Speed (no load)........................................................................... 3400 RPM

Volts ............................................................................................................. 220 V

Amps, Hertz .........................................................................................12 A, 60 Hz

Cutterhead Diameter ............................................................... 2-3/4"  (69.85 mm)

Cutterhead Speed (RPM / CPM).....................................5000 RPM / 20,000 CPM

25-210H Number of Carbide Inserts, 4-sided .................................................... 56

25-210H Knife Insert Size (L x W x T) ....................................0.59" x 0.59" x 0.10"

25-210 Number of HSS Knives ........................................................................... 3

25-210 Knife Size (LxWxH) ..................................................... 12-3/16" x 1" x 1/8"

Maximum Depth of Cut (Planing & Jointing) .................................. 1/8" (3.18 mm)

Maximum Cutting Width (Planing & Jointing)..................................12" (304.8 mm)

Maximum Cutting Depth (Planing Height) ....................................7-7/8” (200 mm)

Planer Table Size ...............................................21-1/4" x 12-1/8" (540 x 308 mm)

Feed Speed Planing SF/min ........................................................... 23 (7 SM/min)

Jointer Table Size .............................................12-1/4" x 55-1/2" (311 x 1410 mm)

Jointer Table Height ................................................................... 33-1/2" (850 mm)

Fence Size ............................................................6" x 43-1/4" (152.4 x 1100 mm)

Fence Tilting Degree ................................................................................... 0 - 45°

Dust Port ............................................................................ 4” Diameter (100 mm)

Dust Collection Required CFM ........................................................................ 650

Noise Level (no load) .................................................................................. ≤98dB

Overall Size (LxWxH)............55-1/2" x 29-1/2" x 39-1/2" (1410 x 749 x 1003 mm)

Base Size ...........................................................21-1/4” x 19-1/4” (540 x 489 mm)

Net Weight ....................................................................................403 lbs (183 kg)

Specifications.....................................................................................................................2 

Safety  Instructions  ........................................................................................................3  -  6

Getting To Know Your Machine ..............................................................................................7

Contents  of  Package  ..........................................................................................................7

Installation  ......................................................................................................................8 

Assembly .......................................................................................................................8 -  9

Adjustments...............................................................................................................10  -  19

Operation  ..................................................................................................................19  -  22

Accessories 

..................................................................................................22

Maintenance .....................................................................................................23

Warranty  ..........................................................................................................................  23

Troubleshooting .........................................................................................................24 - 25

Electricals & Wiring Diagram .......................................................................................5 & 25
Parts  Diagrams  &  Parts  Lists  ..................................................................................26  -  39

25-210H

 has a Helical Cutterhead with Knife Inserts       

25-210

 has a Straight Knife Cutterhead