SAFETY INSTRUCTIONS
GENERAL SAFETY
Operating a Cordless Tool can be dangerous if
safety and common sense are ignored. The
user must be familiar with the operation of the
tool. Read this manual to understand this
Cordless Tool.
DO NOT
operate this Cordless
Tool if you do not fully understand the limitations
of this tool.
DO
NOT
modify this Cordless Tool in
any way.
BEFORE USING CORDLESS TOOLS
To avoid serious injury and damage to the tool,
read and follow all of the Safety and Operating
Instructions before operating the Cordless Tool.
1. Some dust created by using power tools
contains chemicals known to the State of
California to cause cancer, birth defects, or other
reproductive harm.
Some examples of these chemicals are:
•
Lead from lead-based paints.
•
Crystalline silica from bricks, cement, and
other masonry products.
•
Arsenic and chromium from
chemically treated lumber.
Your risk from these exposures varies,
depending on how often you do this type of
work. To reduce your exposure to these
chemicals: work in a well ventilated area and
work with approved safety equipment, such as
those dust masks that are specially designed to
filter out microscopic particles.
2.
READ
the entire Owner’s Manual.
LEARN
how to use the tool for its intended applications.
3.
GROUND ALL TOOLS.
If the tool is
supplied with a 3-prong plug, it must be plugged
into a 3-contact electrical receptacle. The 3rd
prong is used to ground the tool and provide
protection against accidental electric shock.
DO
NOT
remove the 3rd prong.
4.
AVOID A DANGEROUS WORKING
ENVIRONMENT. DO NOT
use electrical tools in a
damp environment or expose them to rain.
5.
DO NOT
use electrical tools in the presence of
flammable liquids or gasses.
6.
ALWAYS
keep the work area clean, well lit,
and organized.
DO NOT
work in an environment
with floor surfaces that are slippery from debris,
grease, and wax.
7.
KEEP VISITORS AND CHILDREN AWAY.
DO NOT
permit people to be in the immediate
work area, especially when the electrical tool is
operating.
8.
DO NOT FORCE THE TOOL
to perform an
operation for which it was not designed. It will do
a safer and higher quality job by only performing
operations for which the tool was intended.
9.
WEAR PROPER CLOTHING. DO NOT
wear
loose clothing, gloves, neckties, or jewelry. These
items can get caught in the machine during
operations and pull the operator into the
moving parts. The user must wear a protective
cover on their hair, if the hair is long, to prevent it
from contacting any moving parts.
10.
CHILDPROOF THE WORKSHOP AREA
by
removing switch keys, unplugging tools from the
electrical receptacles, and using padlocks.
11.
ALWAYS UNPLUG THE TOOL FROM THE
ELECTRICAL RECEPTACLE
when making
adjustments, changing parts or performing any
maintenance.
12.
KEEP PROTECTIVE GUARDS IN PLACE
AND IN WORKING ORDER.
13.
AVOID ACCIDENTAL STARTING.
Make
sure that the power switch is in the “OFF” position
before plugging in the power cord to the electrical
receptacle.
Page 4
Summary of Contents for 31-200
Page 13: ...Page 13 WARRANTY...
Page 14: ...PARTS DIAGRAM Page 14 31 200 12V Sander Polisher...
