6
SPECIFIC SAFETY INSTRUCTIONS FOR SANDERS
SAFETY INSTRUCTIONS
CALIFORNIA PROPOSITION 65 WARNING:
Some dust created by power sanding, sawing, grinding, drill
-
ing, and other construction activities contains chemicals known to the State of California to cause cancer
and birth defects or other reproductive harm. Your risk from exposure to these chemicals varies, depending
on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with ap
-
proved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
For more detailed information about California Proposition 65 log onto rikontools.com.
This machine is intended for the surfacing of natural, solid woods. Any other use not as specified, in
-
cluding modification of the machine or use of parts not tested and approved by the equipment manu
-
facturer can cause unforeseen damage.
ATTENTION:
Use of this sander still presents risks that cannot be eliminated by the manufacturer.
Therefore, the user must be aware that wood working machines are dangerous if not used with care
and all safety precautions are adhered to.
This owner’s manual is not a teaching aid and is intended to show
assembly, adjustments, and general use.
Special Safety Rules For Sanders
1. Do not operate this machine until you have read all of the following instructions.
2. Do not attempt to operate this machine until it is completely assembled.
3. Do not turn ON this machine if any pieces are damaged or missing.
4. If you are not familiar with the operation of the machine, obtain assistance from a qualified
person.
5. It is highly recommended that this machine be mounted on a level surface or stand.
6. Always wear protective eye wear and hearing protection when operating this machine.
7. Do not operate this machine if you are under the influence of drugs and/or alcohol.
8. Do not wear loose clothing or jewelry when operating this machine. Tie back long hair.
9. Do not wear any gloves while operating this machine.
10. Always make sure the power switch is in the OFF position prior to plugging in the machine.
11. Always make sure the power switch is in the OFF position and the machine is unplugged
when doing any cleaning, assembly, setup operation, or when not in use.
12. Always wear a dust mask and use dust collection when working or cleaning the sander.
13. Make sure that all safety guards and hardware are securely tightened before operating the
machine.
14. The use of any accessories or attachments not recommended may cause injury to you and
damage your machine.
15. This machine must be properly grounded.
16. Replace worn, frayed or torn abrasives, as injury to the user, or the machine, may result.
17. Always keep your face and hands clear of moving parts such as belts, discs and pulleys.
18. Remove material or debris from the work area. Keep work area neat and clean.
