background image

17

RIKON Warranty

16 Progress Road

Billerica, MA  01821 

The card must be entirely completed in order for it to be valid. If you have any questions 

please contact us at 877-884-5167 or warranty@rikontools.com. 

Warranty

5-Year Limited Warranty

RIKON Power Tools, Inc. (“Seller”) warrants to only the original retail consumer/purchaser of our 

products that each product be free from defects in materials and workmanship for a period of five 

(5) years from the date the product was purchased at retail. This warranty may not be transferred.

This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, 

accidents, repairs, alterations, lack of maintenance or normal wear and tear. Under no 

circumstances will Seller be liable for incidental or consequential damages resulting from 

defective products. All other warranties, expressed or implied, whether of merchantability, 

. This warranty does not cover 

products used for commercial, industrial or educational purposes.

This limited warranty does not apply to accessory items such as blades, drill bits, sanding discs or 

belts and other related items.

Seller shall in no event be liable for death, injuries to persons or property, or for incidental, 

contingent, special, or consequential damages arising from the use of our products.

To take advantage of this warranty proof of purchase documentation, which includes date of 

purchase and an explanation of the complaint, must be provided. 

The Seller reserves the right to effect at any time, without prior notice, those alterations to parts, 

.

Summary of Contents for 50-150



















Reviews: