8
Keep off combustible when cutting.
Keep hot workpiece after cutting away from flammable gas.
Do move away the combustible around when cut the dooryard, ground and wall,.
The wire connection of base metal should be as close to the cutting place as possible.
Never cut those facilities with gas pipe or airtight slot.
Put fire extinguisher around the cutting area to prevent fire.
The gas and fumes are harmful to health, please wear protective device
according to regulations.
Wear exhaust equipment and breathe preventive facilities to prevent gas poisoning or choke.
Use suggested part exhaust equipment and breathe preventive facilities to prevent hurt or
poisoning by gas and other powder, please.
To prevent oxygen-deficiency, air out the gas-filled room which is full of CO
2
and argon on the
bottom, when operating on trunks, boilers, cabins, etc.
Please accept the supervisor’s inspection when operating in narrow space. Air the room and
wear breathe preventive facilities.
Never operate in degrease, washing or spray space.
Using breathe preventive facilities when cut shielded steel for it will cause poisonous dust and
gas.
The arc, spark, residue and noise are harmful to health, please wear
protective appliance.
Eye protection against arc is recommended when cutting or supervise cutting.
Please wear preventive spectacles.
Operator
’s gloves, operator’s goggles, long sleeve clothes, leather apron, and other standard
protection equipments must be worn for cutting operation.
A screen to protect other people against the arc must be set in the cutting place.
Please follow the notes below to avoid gas cylinder toppling over or
broken.
Use the gas cylinder correctly.
Use the equipped or recommended gaseous regulator.
Read the manual of gaseous regulator carefully before using it, and pay attention to the safety
