Description of the Boiler & Delivery Terms
The RIMA ONGAS 300/W Series Condensing Boiler is completely assembled , Wall Hung , fully modulating ,
high efficiency condensing boiler up to (109%) and delivered with steel enamel powder coated casing , shrinked
with film , on a pallet. Cast aluminum heat exchanger and other main components are supplied within boiler
chassis with easy removable casing for cleaning and maintenance. All main electrical and electronically controls
are supplied in the control panel which is placed on top of the boiler. The RIMA ONGAS 300/W series
condensing boiler is suitable for room sealed or open flue applications (B and C type) and has been designed
for central heating also optionally domestic hot water. The operating pressure of system is between the 0,8 bar
min. to 6 bar max. The circulation pump must be installed to system. Every boiler has been tested during the
assembling properly. The pre-mix burner with its air/gas system ensures clean mixing , reaches up to 109%
efficiencies without any problem in condensing mode , combined with ultra low NOx and minimum CO
emissions. The control panel provides the actual and set values to be read and adjusted on the built-in LCD
display, which also provides normal operating and fault code indication. The control system of the boiler allows
to monitoring all boiler conditions.
Smart
Control
Panel
Fresh Air
Intake
Flue Gas
Measuring
Point
Chimney
Automatic
Air Vent
Condansate
outlet
Water
Outlet
Water
İnlet
Gas
Inlet
Summary of Contents for ONGAS 300/W Series
