Installation Instructions
RIMA ONGAS 300/W Series Condensing Boiler should be positioned as follows ;
Place the boiler in the plant room to operation location.
Remove films, straps, pallets, top and sides and all other packaging.
All gas appliances must, by law, be installed by authorized persons. Failure to install appliances correctly could
lead to prosecution. It is in your own interest and that of safety to ensure that the law is complied with.
The boilers must be installed where frost protected place. The water in the radiators must be discharged when
the boiler is not working to avoid from frost.
The boiler must not be installed place that contains humid, vapor, dust. Otherwise , boiler is not working
correctly and efficiently.
The ground where the boiler installed must be stabilized, strong, flat and high from floor level for avoid of
flooding.
Fresh air supply must be refined from halogen hydrocarbons (sprays, paint and some chemical
materials), otherwise this materials can cause corrosion and erosion in the boiler and flue gas chimney.
Do not put flammable materials on top of the boiler or near the boiler.
The fresh air intake, must be according to local gas suppliers and gas connecting instructions, otherwise
there is a risk of poisoning.
Condensing water and chimney connection must be done according to regulations and standards.
800 mm
Summary of Contents for ONGAS 300/W Series
