Replace the USB hub on a DL5200
DL5200™
2000775_A
© 2007, Rimage Corporation
2
rews
(Qty. 2) and set them aside.
5.
m
from the system.
4. While holding the USB hub in one hand, remove the
Phillips sc
Re ove
the
USB hub
Install the USB hub
1. Position the replacement USB hub on the inside
of the back panel so that the connector is on the
left when looking at the rear of the system.
2. Insert
the
Phillips screws
(Qty. 2) to secure the
USB hub.
Connector
3. Connect the cables (Qty. 3) to the USB
hub.
•
USB cable (
from
P3
•
USB cable
at P2
•
Power cable
the back panel) at
USB Cable at P2
USB Cable at P3
Power Cable
