110769_H
4
Configure the DLN5200.
Power on the DLN5200.
7
Learn more.
10
For information about submitting orders to the DLN5200
across a network, refer to the
Advanced Setup (Network)
Guide
.
For information about operating and maintaining the
DLN5200, refer to the
DLN5200 User Guide
included with
your product.
For additional support and product information, go to
www.rimage.com/support.html.
If you will
submit jobs from other networked PCs
, refer
to the
Advanced Setup (Network) Guide
.
If you connected a monitor, keyboard, and mouse, log into
the Rimage DLN5200 with the following username and
password:
Username:
Adminstrator
Password:
password
8
Activate your Rimage Software.
You have 30 days to activate your Rimage software.
Until your software is activated, you will be prompted to
activate your software each time you use the Rimage
software.
When the activation dialog displays, select an option and
follow the onscreen prompts to activate your software.
9
a. Set the
switches
to
the on position.
Note:
The main power switch is used to apply power
to the entire system, while the PC power switch
applies power to the embedded PC. For more
details, refer to your user guide.
b. Press the
PC power button
to power on the system.
PC Power Switch
Main Power Switch
PC Power Button
Important!
Rimage recomends that your Network
Administrator use these instructions as a guide to
complete the configuration and software installation.