background image

2

1

For more information visit 

rimage.com/support

2004849_A

Compliance Information

Product

Professional 

2450

 

Model 

RAS36

Notice for USA

NOTE:

 This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC 

Rules. These limits are designed to provide reasonable protection against harmful interference when this equipment is operated in 

a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in 

accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a 

residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own 

expense.
This product complies with UL 60950-1, 2

nd 

edition.

Notice for Canada

This Class A digital apparatus complies with Canadian 

ICES-003 Issue 6: 2016

. Cet appareil numerigue de la classe A est conforme a 

la norme NMB-003 du Canade.

This product complies with CAN/CSA-C22.2 No. 

60950-1

.

Notice for Europe

This product is in conformity with the EMC Directive (2014/30/EU) and the Low-Voltage Directive (2014/35/EU) through compliance 

with the following European standards: EN 55032 Class A Limit; EN 55024; EN 61000-3-2; EN 61000-3-3; EN 60950-1. The CE mark has 

been affixed in accordance with the CE Marking Directive 93/68/EEC.

Notice for Japan

This is a Class A product based on the standard of the 

Voluntary Control Council for Interference by Information 

Technology Equipment (VCCI-A). If this equipment is used in a 

domestic environment, radio interference may occur, in which 

case, the user may be required to take corrective action. 

Translation:

この装置は、クラスA機器です。この装置を住宅環境で使用すると電波妨害を

引き起こすことがあります。この場合には使 用者が適切な対策を講ずるよう要

求されることがあります。 VCCI-A

Notice for Australia

This product complies with 

AS/NZS CISPR 32: 2013.

Notice for Korea

It is certified that foregoing equipment has been certificated under the Framework Act on Telecommunications and Radio Waves 

Act.

Translation:

위 기기는 전기통신기본법, 전파법 에 따라 인증되었음을 증명 합니다.
B급 기기 (가정용 정보통신기기): 이 기기는 가정용으로 전자파적합등록을한 기기로서 주거지역에서는 물론 모든지역에서 사용할 수 있습니다.

Notice for Taiwan

This is class A digital device. It may cause radio-frequency interference when used in a residential area. In this case, the users are 

advised to take appropriate precautions. 

Translation:

這是甲類的資訊

品,在居住的環境中使用時,可能會造成射頻干擾,在這種情況下,使用者會被要求採取某些適當的對策.

Summary of Contents for Professional 2450






















Reviews: