3 | Safety
48 / 148
User and maintenance manual
–
It is forbidden to make any modifications to the kart. If you detect any modifications, immediately notify your
supervisor.
–
All danger areas must be kept clear. Do not place any objects in the danger area of the kart. Before allowing
any person to enter the danger area, switch off the kart and disable it.
3.1.3
Troubleshooting instructions
The following general rules apply to all fault location and troubleshooting work:
–
All maintenance and repair work must be performed by suitably qualified personnel.
–
Switch off the kart.
–
Attach a warning sign to the kart to prevent inadvertent starting.
–
If the kart must be run for fault location or troubleshooting, have a second person stand by to switch of the
kart in an emergency.
–
Ensure that the kart is safely propped up and that its wheels can turn freely.
–
Wait until all components have cooled down.
Proceed with identifying the cause of the problem and eliminating it.
3.1.4
Maintenance and repair instructions
The following general rules apply to all maintenance and repair work:
–
All maintenance and repair work must be performed by suitably qualified personnel.
–
Switch off the kart.
–
Attach a warning sign to the kart to prevent inadvertent starting.
–
Ensure that the kart is safely propped up and that its wheels can turn freely.
–
Wait until all components have cooled down.
3.1.5
General notes and instructions re. electrical equipment
The following general rules apply to all work on the electrical equipment of the kart:
–
The kart is powered electrically. If the electrical equipment is incorrectly installed or if its insulation fails,
there is a risk of fatal injury.
–
The electrical equipment of the kart must only be accessed by electricians or personnel trained by RiMO.
Keep all control cabinets locked at all times.
–
Changes to the control system of the kart might impair its safety. All planned modifications must be ap-
proved in writing by the manufacturer of the kart.
–
After completion of the work, test the safety devices to ensure that they work properly.
