Transport and installation | 4
User and maintenance manual
63 / 148
4.5.3
Installing mechanical components
Place the kart at the location of operation, taking into account the following:
The location must conform to all statutory requirement that might apply.
The kart track must conform to all statutory ground, space and safety requirements.
The kart must be assembled, commissioned and/or put into storage by specially trained technicians.
a)
There must be sufficient space around the kart for maintenance and repair access.
Mounting wheels
Depending on the transport requirements, the wheels might have been removed from the kart prior to shipping.
After unloading the kart, mount the wheels.
WARNING
Risk of accident from non-approved wheel rims or tyres
Non-approved wheel rims and tyres can cause damage to the bodywork of the kart.
The road adhesion of the tyres might not be suitable for the kart. This can result in
serious injury.
a)
Use only wheel rims and tyres that have been approved by RiMO.
NOTICE
Mounting wheels on front and rear axle
The front wheels are secure with one hexagon nut each. The rear wheels are secured
with three hexagon nuts each.
When mounting the wheel, adjust the bearing play of the front axle wheel bearing.
Fig. 40:
Mounting wheel
1 Wheel
2 Hexagon nuts
3 Arrow: direction of rotation of wheel
