Inflatable & Leisure Inflation
Select the suitable adapter and screw into the valve connector.
Adapters are clipped onto the rear of the compressor under the coiled power cable.
Insert the connector adapter into the appropriate inlet of the inflatable
Plug the 12v DC plug into the vehicle 12v socket. (Fig 1)
Push the ON/OFF button to switch the compressor on.
Caution:
Only inflate product to the manufacturer’s specifications. Do not over inflate
Push the ON/ OFF button to switch the compressor off.
Remove adapter from the inflatable and remove adapter from the connector.
Replace the adaptor on the storage clip.
Typical Inflation Pressure (guide only)
Mountain bike tyres 35-50psi
Road bike
90-100psi
Football 13psi
Basketball
9psi
Volleyball
5psi
Lawn tractor tyre 22psi
Conversion Chart (guide only)
psi
KPa
BAR
psi
KPa
BAR
10
68.9
0.7
70
482.6
4.8
20
137.9
1.4
80
551.6
5.5
30
206.8
2.1
90
620.5
6.2
40
275.8
2.8
100
689.5
6.9
50
344.7
3.5
125
861.9
8.6
Specification Table
Power supply
12v DC
Max Amperage
10 amps
Pressure measurement range
0 – 100 psi
Power cable length
3m
Air hose length
480mm
Operation temperature
-20˚C to +60˚C
approved
Distributed by Ring Automotive Ltd, Gelderd Road, Leeds, England, LS12 6NA
Switch board +44 (0)113 2132000
Technical he44 (0)113 2137339
+44 (0)113 2310266
autosales@ringautomotive.co.uk
Ring Automotive Ref:- L316