background image

IMPORTANT PRODUCT INFORMATION

Use Responsibly.

 Read all instructions and safety information before use.

SAFETY INFORMATION: FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD 
RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER INJURY OR DAMAGE.

Small parts contained in the Spotlight Cam Hardwire Kit may present a choking hazard to 
small children.  Keep small parts away from children.

Terms of Service and Warranty

Use of the product is subject to your registration with Ring and your agreement with the 
Terms of Service found at 

www.ring.com/terms

.

To review your warranty coverage, please refer to the enclosure inside this box or visit 

www.ring.com/warranty

.

RECYCLING YOUR DEVICE PROPERLY

In some areas, the disposal of certain electronic devices is regulated. Make sure you 
dispose of, or recycle, your device in accordance with your local laws and regulations. 
For information about recycling your device, go to 

www.amazon.com/devicesupport

.

RENSEIGNEMENTS IMPORTANTS CONCERNANT LE PRODUIT

Utiliser le produit de manière responsable.

 Lire toutes les instructions et les consignes 

de sécurité avant utilisation.

CONSIGNES DE SÉCURITÉ : LE NON-RESPECT DES PRÉSENTES CONSIGNES DE SÉCURITÉ 
POURRAIT CAUSER UN INCENDIE, UNE DÉCHARGE ÉLECTRIQUE OU UNE AUTRE FORME 
DE BLESSURE OU DE DOMMAGE.

Les petites pièces contenues dans le Spotlight Cam Hardwire Kit peuvent présenter un 
risque d’étouffement pour les jeunes enfants. Garder les petites pièces hors de portée 
des enfants.

Conditions de l’entretien et de la garantie

Pour être autorisé à utiliser le produit, vous devez vous inscrire auprès de Ring et accepter 
les conditions d’utilisation qui figurent à l’adresse 

www.ring.com/terms

 (en anglais 

seulement).
Pour consulter les détails de votre garantie, reportez-vous au document joint à l’intérieur de 
l‘emballage ou consultez la page 

www.ring.com/warranty

 (en anglais seulement).

RECYCLAGE ADÉQUAT DE VOTRE APPAREIL

Dans certaines régions, la mise au rebut de certains appareils électroniques est 
règlementée. Veillez à éliminer ou recycler votre appareil conformément aux lois et 
règlementations locales. Pour en savoir plus sur le recyclage de votre appareil, consultez 

www.amazon.com/devicesupport

.

WARNING:

 Risk of electrical shock. 

 

Disconnect power at the fuse or circuit breaker 

before installing. 

 

Verify that the supply voltage is correct. Connect fixture to a 

100 VAC~240 VAC 50/60 Hz power source. 

 

Always follow electrical code standards when installing 

wired connections. 

 

If you are outside of North America, installation and wiring 

must be performed by a licensed electrician. 

 

CAUTION:

 

Risk of fire.  

 

Do not install near combustible or flammable surfaces. 

 

NOTICE 

 

Do not connect this light fixture to a dimmer switch or timer. 

 

Must be installed on a UL listed weatherproof electrical box.

3

2

Spotlight_Cam_Wired_Hardwire_Kit_MANUAL_v7.indd   3

6/1/20   9:19 PM

Summary of Contents for Spotlight Cam Hardwired Kit












Reviews: