Screw in the box cover.
Use the included screws to secure
the box cover to the electrical box.
Be sure to add a metal washer,
then a rubber washer to each
screw before inserting.
Mount your Spotlight Cam.
Insert your Spotlight Cam into the box cover. Once it’s fully
seated, turn to the right to lock it in.
Add the Security
Screw.
Insert and tighten the
security screw to lock your
Spotlight Cam into the box
cover.
Turn on power at the breaker.
Once your Spotlight Cam is installed, it’s time to turn power
back on at the breaker.
If the lights on your Spotlight Cam turn on, you’re all set!
If not, turn power off at the breaker and check your
connections.
Some round boxes may only take two screws. Seal unused holes in
the cover with the included screws and nuts. Add a metal washer
backed by a rubber washer to each side before tightening the nut.
17
16
Spotlight_Cam_Wired_Hardwire_Kit_MANUAL_v7.indd 17
6/1/20 9:19 PM