Operation
20/56
On/off switch turbine
In
manual mode
, the turbine may be manually started with
the green button. The white lamp is now active. The turbine
is stopped with the red button.
The switch has no function in
automatic mode
.
Pos : 10.6.7 /7 Betri eb, Bedienung/ Schaltsc hränke/ Beschr eibung Tas ter Filterrei nigung @ 5\ mod_1386065088451_131. doc x @ 47885 @ @ 1
Button "Filter cleaning"
Manual operation
: Manual start of filter cleaning.
See chapter "Electrical filter cleaning".
Automatic operation:
Button has no function.
Pos : 10.6.8 /7 Betri eb, Bedienung/ Schaltsc hränke/Ü berschrif t: M eldeleuc ht en @ 5\ mod_1386066911739_131. doc x @ 47917 @ 2 @ 1
7.4
Indicator lamps
Pos : 10.6.9 /7 Betri eb, Bedienung/ Schaltsc hränke/ Beschr eibung Mel del eucht e St euers pannung @ 5 \ mod_1386066356012_131.doc x @ 47896 @ @ 1
Indicator lamp control
voltage
The lamp indicates whether the control voltage of 24V is
applied.
Pos : 10.6.10 / 7 Betrieb, Bedi enung/Sc haltsc hränke/Besc hrei bung M eldeleuc ht e St örung @ 5\ mod_1386067167031_131. doc x @ 47927 @ @ 1
Indicator lamp
Interference
General display if something is wrong with the system (e.g.
motor protection tripped, container missing). See chapter
on troubleshooting.
Pos : 10.6.11 / 7 Betrieb, Bedi enung/Sc haltsc hränke/Besc hrei bung M eldeleuc ht e Dif fer enz druc k z u hoch @ 5\ mod_1386068062081_131. doc x @ 47949 @ @ 1
Indicator lamp
"differential pressure
too high"
Indicator lamp "differential pressure" lights up:
Version filter clogged:
If the pressure is too high, the indicator lamp lights up and
the filter is clogged and needs to be cleaned or replaced.
Version pipe clogged:
The pipe or nozzle is clogged and must be cleared.
Version plant running:
No vacuum can be built (e.g. defective turbine, missing
tank)
Pos : 10.7 /0 Allgemeines /Seit enumbr uc h @ 0 \ mod_1265272007940_0. doc x @ 2191 @ @ 1
