Maintenance/Repair
25/56
Pos : 12.23 / 9 Wart ung/ Ins tandsetzung/T abelle Wart ungsint er vall e, Ü berschrif t @ 0 \ mod_1263810791405_131.doc x @ 1564 @ 2 @ 1
9.2
Maintenance intervals table
Pos : 12.24 / 9 Wart ung/ Ins tandsetzung/R A/T abelle Wart ungsi nt er vall Spänesauger R A 240 @ 2\ mod_1337331906259_131. doc x @ 13464 @ @ 1
Interval
Check
Measure
daily
Suction hose leaking?
Collection container full?
Pocket filter contaminated?
Seal between hood and filter
container, between filter container and
preseparator intermediate ring,
between preseparator intermediate
ring and collecting container (see wear
parts list)
Replace hose
Empty collection container
Start cleaning
Clean or replace seal
weekly
Collection container
clean
monthly
Emptying flap seal
Check
annually
Drive unit, bearing noise
Device/plant
Filter (see wear parts list)
Replace bearings on
demand
Check for air-tightness
Check for damage or
replace
Pos : 12.25 / 1 Grundlegende Sic her hei tshi nweise/Signal wort-F eld "Hinweis" @ 0\ mod_1261404960439_131.doc x @ 905 @ @ 1
NOTICE
Pos : 12.26 / 9 Wart ung/ Ins tandsetzung/R einigung G erät @ 2 \ mod_1340195497910_131.doc x @ 17554 @ 2 @ 1
9.3
Cleaning
Dust on the appliance must be avoided and must be removed by regularly cleaning.
Before cleaning the device, be sure to switch off the motor protection switch and unplug the device from the
power supply. Cleaning can take place with a damp cloth or a suitable industrial vacuum cleaner. Do not use
solvents such as thinner, alcohol or benzene. Never immerse the device in water.
Pos : 12.27 / 0 Allgemeines/ Sei tenumbruch @ 0\ mod_1265272007940_0. doc x @ 2191 @ @ 1
