Step 2
28
11
8
22
26
7
6
5
18
26
22
17
1
22
26
2
A. Insert Punchbag Support (8) into the top of Main Vertical Support (5), aligning the hole.
B. Attach Left Support (7) and Right Support (6) to Left and Right Base (1, 2) with four M10*45
Carrige Bolts (17), four M10
Washers (22) and four M10 Lock Nuts (26).
C. Attach Left and Right Support (7, 6) to Main Vertical Support (5) and Punchbag Support (8)
with two M10*80 Bolts (18),
four M10 Washers (22) and two M10 Lock Nuts (26).
D. Attach Punchbag Hook (11) to Punchbag Support (8) with M10 Washer (22) and M10 Lock
Nut (26).
E. Insert ø60 Round Tube Plug (28) into Punchbag Support (8).