Installation and opreating instructios for tor-
sionally stiff gear couplings
RDZ…DTO/…DFO
E 06.705
As of: 12.08.2020
Version: 02
Signed: SCCE
Checked: SCHW
No. of pages: 21 Page: 21
Figure 11.1: Checking the wear limit
12. Spare part stockpiling
In order to keep disturbances in operation to a minimum, it is advisable to keep a stock of spare
parts directly at the deployment site in order to be able to guarantee optimal operational capabil-
ity.
13. Disposal
At the end of its operating life:
-
plastics must be disposed of via a disposal company,
-
metals must be cleaned and disposed of properly with other scrap metal,
-
dispose of the lubricant under observation of the applicable provisions
Please also properly dispose of the packaging.
Attention!
The wear measurement needs to be carried out on both coupling halves for
coupling RD
Z … DTO.
Attention !
RINGSPANN shall not assume any liability for any occurring damages if
spare parts from other manufacturers are used.