Rinnai 11
Split AC OM
TURBO
This mode allows you to cool indoor air quickly in summer or warm it quickly in
winter.
1� Press the "ON/OFF" button to turn on appliance�
2�
Confirm that either "COOL" or “HEAT” modes are selected as shown on the
LCD screen�
3�
Press the "TURBO" button, "TURBO" is shown on the LCD screen and an
addition fan speed bar is also displayed�
NOTE
When the appliance is operating in AUTO, FAN or DRY modes the Turbo function is not available.
In turbo mode the fan is set to operate at the maximum output. Attempting to alter the fan speed
during TURBO mode operation will cancel this mode and return the appliance to manual operation.
QUIET
This mode operates the appliance at it's quietest, ideal for when minimal indoor
noise levels are desired�
1� Press the "ON/OFF" button to turn on appliance�
2�
Confirm that either "COOL" or “HEAT” modes are selected as shown on the
LCD screen�
3�
Press the "QUIET" button, "SILE" is shown on the LCD screen and a single
fan speed bar is also displayed�
NOTE
Attempting to alter the fan speed during Quiet mode operation will cancel this mode and return
the appliance to manual operation.
HEALTH (WI-FI)
When pressed 8 times in quick succession, this button activates and or resets the Wi-Fi module of the appliance.
The appliance will respond with a double beep to confirm Wi-Fi activation or reset.
For further details refer to the Wi-Fi Operation Manual, a copy of the manual may be downloaded from the Rinnai
web site: http://www.rinnai.com.au/cooling/
SLEEP MODE
1� Press the "ON/OFF" button to turn on appliance�
2� Set the desired mode, temperature and fan setting as per basic
operations�
3�
Press the "SLEEP" button, "SLEEP" is shown on the LCD screen:
For Cooling:
Allows the set temperature to increase and decrease over
a 10 hour period at pre-set time intervals to maintain your comfort while
saving energy (see graph right)�
For Heating:
Allows the set temperature to decrease and increase over a
10 hour period at pre-set time intervals to maintain your comfort while saving
energy (see graph right)�
NOTE
Sleep mode is not available in FAN only mode.
The Delay Off Timer (see page 12) can be used in conjunction
with SLEEP mode to turn off the air conditioner automatically.
4�
Pressing the "SLEEP" button again will cancel sleep mode, "SLEEP"
will no longer be shown on the LCD screen.
TURBO
C
COOL
AUTO
SPEED
RUN
Low
Medium
High
Turbo
C
COOL
SILE
SPEED
RUN
Quiet
C
H
ON
LRSWING
SLEEP
COOL
POWERCON
iFEEL
SWING
SPEED
OFF
RUN
C
H
ON
LRSWING
SLEEP
COOL
POWERCON
iFEEL
SWING
SPEED
OFF
RUN
SLEEP
MODE
SLEEP
MODE with OFF timer
-1°C
-1°C
C°C = Set cooling temperature
H°C = Set heating temperature
2
Sleep mode 1O hours
1
10
7
1°C
C°C
H°C
1°C
Sleep Mode Finishes
Sleep Mode
Starts
0
2
1
10
7
0
ADVANCED OPERATION
