5
Fire Prevention Equipment in Surrounding Area
• Allow sufficient space between the equipment
and flammable objects such as furniture, walls and
shelves.
– Allow at least the standard installation dimensions (in figure
at right) in consideration of maintenance management and
works. Failure to do so might result in fire or the equipment
overheating and cause burns.
300
250
500
45
100
Standard installation dimensions
(Unit: mm)
Checking gas and power supply used
• Use the equipment with only the gas type (gas group)
and power supply (power voltage/frequency) indicated
on the data plate on the equipment.
Do not use with other gas types or
power supplies.
– Do not use the equipment when gas and
power supply used does not match the
gas and power supply indicated on the
data plate. Then, incomplete combustion
may cause carbon monoxide poisoning, or
cause explosive ignition or equipment to
malfunction.
Data plate (example)
Model
For
GAS
Pressure
IN.W.G
Input
Btu/hr
Voltage
V
Cycle
Hz
Serial No.
Model Name
Product date (year/month)
Lower 2 digits of production year
Production month indicated at 2 digits
Check gas type
Safety Precautions
(Installation)
Warning
This symbol indicates that ignoring the accompanying explanation and mishandling the
product might result in death or serious injury or might cause the risk of fire.
Remodeling/Disassembly Prohibited
• Users must never use tools to install, move, disassemble,
repair, or remodel the equipments themselves.
– Doing so may cause carbon monoxide poisoning or fire, and cause the
equipment to malfunction.
– Installation, moving, disassembly, repair, or remodeling of the equipment
requires highly special knowledge.
Disassembly
Prohibited
