6
Grease filter
(Fig. 9)
Grease filters are used to absorb the grease particles
formed during cooking process. The filters must be
removed and cleaned every 4 weeks, depending on
how often the appliance is used. Clean the filter
either by hand or in the dishwasher.
Note:
Take care
not to bend the filters during washing.
If by hand washing, soak the filters in warm
detergent solution to simplify the removal of grease.
Brush the filters, rinse thoroughly and leave it to dry
before refitting.
If by dishwasher, select an appropriate wash
program. Leave it to dry before refitting.
Note:
slight
discoloration of the filter may occur.
Removing and inserting the grease filters:
To remove, depress the handle and pull down at
the same time.
To refit, slot the filter into position. Make sure that
handle is visible on the outside.
Cleaning the appliance body
Clean the extractor hood using warm detergent
solution and a soft damp cloth. Wipe dry with a lint-
free cloth.
Avoid using corrosive or abrasive products that could
damage the surface.
Light replacement
Replace the light bulb with another which has the
same characteristics as a higher voltage bulb could
damage the electrical unit.
Removing and replacing the light bulbs:
o
Unscrew and remove lamp cover.
o
Replace damaged lights as shown.
o
Refit lamp cover.
MAINTENANCE AND CARE
Disconnect the power supply cord before carrying out
any cleaning or maintenance activities. It is important
to clean and/or replace the filters at appropriate
intervals as grease deposits build-up increases the risk
of fire. Do not operate the extractor hood without
grease filter.
Fig 9
You are strongly recommended to follow these safety
instructions. The manufacturer will not be held liable
for any damages to the appliance or any fire hazard Due
to failurea to observe the above safety
recommendations.
.
En
gl
ish
Charcoal Filters
Charcoal filters cannot be reused. They must be
replaced with the appropriate type once a year or
depending on the frequency of appliance usage.
For thie appliance to function effectively, regular
maintenance is a must. Clogged filters restrict airflow
and may cause the motor to overheat.
