6
Cleaning the appliance body
Clean the extractor hood using warm detergent
solution and a soft damp cloth. Wipe dry with a lint-
free cloth.
Avoid using corrosive or abrasive products that could
damage the surface.
Light replacement
Replace the light with another which has the
same characteristics as a higher voltage could
damage the electrical unit.
MAINTENANCE AND CARE
Disconnect the power supply cord before carrying out
any cleaning or maintenance activities. It is important
to clean and/or replace the filters at appropriate
intervals as grease deposits build-up increases the risk
of fire. Do not operate the extractor hood without
grease filter.
You are strongly recommended to follow these safety
instructions. The manufacturer will not be held liable
for any damages to the appliance or any fire hazard Due
to failurea to observe the above safety
recommendations.
.
En
gl
ish
Charcoal Filters
Charcoal filters cannot be reused. They must be
replaced with the appropriate type once a year or
depending on the frequency of appliance usage.
For this appliance to function effectively, regular
maintenance is a must. Clogged filters restrict airflow
and may cause the motor to overheat.
Fig. 9.1
Fig. 9.2
•
Removing and replacing the lights:
o
Push
out
the light assembly using a small
st
rai
ght screwdriver as illustrated in
(Fig.
9
.1
).
o
Disconnect the connector
as illustrated in
(Fig. 9.
2
).
o
Replace a new set of light assembly. Note: For
purchase of spare part, please check with your
local Rinnai Rinnai Customer Care Centre for
assistance
o
Reverse the procedure for refitting and push back the light
assembly into the hood
.
