background image

 

9

4. Importance Precautions 

1. This product is designed to function properly under the conditions of the surrounding 

temperature between 15 to 40

, and the relative humidity of 95% and lower.    Please do not 

use this product when temperature and humidity is out of the ranges above. 

2. The transmission distance of this product can be reached to 30 meters without any obstacle. 

3. In case to interfere the precision medical facilities in the hospital, please do not use this 

product in it. 

4. Please follow the manual to carefully operate this product. 

5. The main function of this product is to alert the care-taker when the patient under the 

abnormal temperature.  The measurement, however, can sometimes be influenced by the 

surrounding temperature.  ONLY do the readings of this product are for reference, and the 

medical attention from a qualified physician should be still sought for actual diagnosis.   

6. Please pay much attention on the child with using this product. Please also keep out of reach 

of children and place it on a higher position. 

 

 

 

 

 

 

5.Specifications 

 

Receiver 

Armband 

Power supply 

Two A4 batteries and up to 

80-100 hours of lasting 

operation 

Power supply 

One 3Volt lithium button 

type (CR2032)  and up to 

72-96 hours of lasting 

operation 

Dimensions

mm

 

156H*42W*39D 

Dimensions

mm

 

136H*85W*9.5D 

Weight 

88g 

Weight 

25g 

Operating 

temperature 

15~40

 

Notice before using

 

1. Keep out of using this product after exercising, bathing, having meals, and taking 

walk within 30 minutes.   

2. Make sure the sweat under the armpit of a child is wiped before using this product, 

especially for the children with sweaty. 

 

Summary of Contents for BTM-D1A












Reviews: