15
SALON LASER TWEEZER
™
TROUbLESHOOTING
I have lost my keys.
• Make a note of the serial number of your product from
the base of the unit and call our Customer Care on
(0) +44 1242 702 345 who will be happy to send you
a replacement key.
the lights on the unit are working but no laser is
emitted on pressing the button.
• Ensure the 2 skin sensors are making contact with the
skin.
No lights are working on the unit.
• Ensure the adapter is turned on at the wall and the
power lead is fully inserted in the back of the unit.
• If controls on either main unit or wand are left untouched
for 20 minutes the unit will enter energy saving mode. To
restart, turn the key off and back on again.
The unit is not responding and one of the power level
lights is flashing.
• This indicates a lockout. If you experience a ‘lockout’,
simply reset the unit by turning it off with the key. Wait 5
seconds before turning the unit on again.
UNIT MAINTENANCE
• After use always unplug the adapter and store out of
reach of children.
• Always store the wand on the main unit and do not use
it for any other purpose than intended.
• Do NOT dissemble or repair. If you have any problems
using the product, contact our Customer Care Department.
• Misuse of the unit can cause harm. Do NOT override
any safety features or open the unit or wand.
• Only use this product with the adapter supplied.
• To protect the laser, do not store at temperatures
exceeding 40ºC.
• After use, wipe the wand clean with a slightly damp
cloth. The main unit can also be wiped over.
• While unplugged, regularly clean the laser shroud
and skin sensors with a cotton bud, to ensure optimum
laser output.
• Do not immerse the main unit or wand in water.
• If you experience unexpected behaviour of this product
then it is possible some external electromagnetic
interference is responsible. you should remove this
source and restart the product to restore full operation.
At no time will the laser fire unintentionally.
© The Dezac Group
© The Dezac Group
© The Dezac Group
