58
Preparations
Connecting the power cord and AC adapter (option)
Connect the AC adapter as shown below. Turn the unit off before making
this connection.
1. Plug one end of the power cord into the small socket on the AC
adapter.
2. Insert the plug of the supply cable from the AC adapter into the
DC IN connector on the DA-21.
3. Plug the other end of the power cord into an AC outlet.
To remove the AC adapter, turn the DA-21 off and then perform the above
steps in reverse order.
Important
Use only the specifi ed AC adapter available as
an option for the DA-21. Using another kind of
AC adapter may lead to damage and malfunc-
tion. When connecting a battery or purpose-built
cable to the DC-IN connector, take great care
to ensure correct polarity and voltage.
DC IN 5-20V
USB
Sync.
Voice
Input
Ext. Trig.
Monitor
Out
Remote Controller
Tacho
Output
Input
1
2
3
4
DC IN connector
AC adapter
NC-98C (option)
To AC outlet, 100 V to 240 V, 50 Hz / 60 Hz
Summary of Contents for DA-21
Page 2: ......
Page 172: ...No 59374 16 07...
