15
1
Making sure
that the
plastic ID
strip faces
out, slide a
PN77 panel
into the
lower RD3
element.
2
Bend the
panel until it
enters the
upper RD3
element.
3
Continue
with the rest
of the PN75
and PN77
panels.
4
Lock the
lower panels
into place
using RC1
glazing
elements.
Make sure
that the end
of the RC
glazing
elements are
in line with
the bottom
of the RD
elements.
Note:
You
may now
remove the
remaining
plastic ID strips
from the
panels.
1
2
3
2
4
