20
EcoGrow Assembly Instructions
Final Touches
Go inside your new Greenhouse and seal any gaps between
the PN75 and PN77 panels and the profiles using SF soft foam
insulation. Cut pieces of SF soft foam insulation 2.5 cm (1")
long, remove the adhesive backing, and place where shown,
making sure that the area is clean and dry.
Congratulations! Your Greenhouse is now completed. You will
find it easy to clean and maintain.
Put this manual is a safe place so you can refer to it if you
decide to add options or need to make a repair.
For your safety and convenience, please take note of the
following:
• Examine your Greenhouse for sharp edges and trim with a
razor knife if necessary.
• It is important to clear your Greenhouse of snow in the
winter.
• If you live in a hot climate, where outside temperatures
exceed 46° C (115° F) in the sun or 36° C (99° F) in the
shade, this may cause the temperature inside the
greenhouse to exceed 55° C (131° F). Such conditions may harm your plants and will damage the
greenhouse by warping structural profiles. In order to prevent damage:
• Ensure good ventilation during hot days.
• Make sure that the temperature inside the greenhouse never exceeds 55° C (131° F) by providing a
shading screen, such as the Rion ShadeNet (available as an option).
Note:
EcoGrow is not responsible for any damage due to high temperatures.
• Always close roof vents in high winds.
EcoGrow offers a wide range of options for your new Greenhouse, including modular shelves, irrigation
systems, additional windows, automatic window openers, and others.
