16
Rion GH30 Greenhouse Assembly Instructions
Raise the Roof
Put the R1 round profiles in
place.
Add the E1 oval profiles until
the frame is completed.
Insert two pins in each
column to lock them in
place. Do not insert pins in
the inner (panel) channels of
the column profiles.
Note:
If there is no wind you
may install the PN1 panels
before putting the roof in place
(page 17)
Place the roof on the
completed frame.
Note:
You will need the
help of another person for a
short while to lift the roof and
put it in place.
Make sure that the roof is in
the same orientation as the
frame. Lift the roof from both
edges and walk through the
door towards the back wall.
Place the roof on the
columns and circle around
the greenhouse and insert
the first 1 cm (½") of the
roof connectors into the
columns.
Note:
Do not insert the
connectors all of the way into
the columns at this time in
order to provide enough
space to install the panels in
the next step.
Summary of Contents for GH30
Page 2: ...2003 Rion Ltd...
Page 27: ...25 Notes...
