Rion GH30, Assembly Instructions Manual

2

Rion GH30 Greenhouse Assembly Instructions

Introduction

Congratulations on purchasing a Rion Greenhouse. We are certain that it will give you many happy years of 

pleasure in your garden.
The drawings in this manual are designed for the greenhouse owner who has purchased a GH33, which 

consists of one front unit (GHF), one back unit (GHB) and one module unit (GHM). If you have purchased 

additional modules (GHM) the instructions are indicated in the text.
The Greenhouse has been designed to be as easy to put together as it is beautiful to look at. Most of the work 

can be done by a single person. Only attaching the roof requires the help of a family member or neighbor for a 

short while.
Easy assembly methods eliminate the need 

for tools or special expertise.



Connect the specified parts.



Match the holes in the profiles and the 

connectors. Place a pin on the pin tool 

and push the pin through the lined-up 

holes to lock the parts in place. Many 

connections require pins on both sides.

Note: 

Extra pins are included.



If you wish to disassemble the parts at 

any time, remove the pins using the pin 

tool. Place the end into the exposed hole 

and lever the pin out.



If a hole in the connector is missing, drill 

a hole with a 6 mm (¼") drill bit through 

the assembled profile and then insert the 

pin.



In extremely rare cases connectors will 

not slip into some round or oval profiles. 

In this case place the affected part into 10 cm of boiling water for 15 seconds before connecting.

Note: 

In some models profiles have identification stickers. We recommend removing them as you work.

Greenhouse assembly is done in the following steps:

Prepare a Foundation for Your Greenhouse 

(page 3)

Identify Greenhouse Parts 

(page 4)

Prepare Your Parts for Assembly 

(page 7)

Lay Out the Greenhouse Frame 

(page 8)

Secure the Frame to Foundation 

(page 9)

Assemble the Roof Pediments 

(page 10)

Assemble Roof Framework 

(page 12)

Cover the Greenhouse Roof 

(page 13)

Raise the Roof 

(page 16)

Cover the Walls 

(page 17)

Seal Panels 

(page 19)

Assemble the Door (Sliding Door Model) 

(page 20)

Attach the Door (Sliding Door Model) 

(page 21)

Assemble the Door (Hinged Door Model) 

(page 22)

Attach the Door (Hinged Door Model) 

(page 23)

Final Touches 

(page 24)











