38
Serial Interface
Current status information message
The current status information message indicates the current operation status
of the KS-93. The message is output in response to the current status information
request message "Q/J".
The format of the message is as follows:
J/GnEnMn
<EOL>
The meaning of the letters is described below.
Gn
Indicates whether measurement is possible or not.
G0
Measurement is possible.
G1
Measurement is not possible (light source is off, or error
has occurred).
En
Indicates whether an error has occurred (laser output level
drop etc.).
E0
No error has occurred.
E1
Error has occurred.
Mn
Indicates whether measurement is currently being carried out.
M0
Measurement is not being carried out.
M1
Pause interval of repeated automatic measurement.
M2
Measurement is being carried out.
Example:
J/G0E0M2
<EOL>
Note
If the message contains "G1" or "E1", its meaning
can be checked using the current error information
message. However, if the error status of the KS-93
has changed in the meantime, the information that is
returned will reflect the new condition.
Summary of Contents for KS-93
