01/18
31
vent the system from flooding the surroundings.
Turn the pressure regulator under the 150 bar (2175 psi).
The pressure may never become over the 150 bar (2175 psi).
Always treat the high-pressure hose well!
5.10 Using the device during periods of frost
Your high-pressure device may freeze up during a period of frost. A number of
safety precautions must be taken.
Additional preparations before departure:
1.
Drain the water tank and the water filter.
2.
Close the drain valve and mount the filter again.
3.
Put approx. 30 litre of antifreeze into the anti freeze tank.
4.
Open the anti freeze valve.
5.
Open the high-pressure valve (
6.
Start the machine and let it idle.
Note: it is not necessary to attach either a nozzle or a gun to the high-
pressure control.
7.
Push button
(Start spraying) on the control box.
8.
Let the high-pressure pump remove all the water, which is still in the
high-pressure hose.
9.
Close the high-pressure valve when anti freeze comes out of the hose
(wait for the blue colour of the antifreeze).
10.
Leave the engine running for some time: to allow all pipes to fill up with
antifreeze.
11.
Push button
(Stop spraying) on the control box and close
the HP valve.
12.
Connect the high-pressure hose to the water fill hose using a special
GK hose coupling.
Summary of Contents for MULTI JET
