01/18
45
8
Maintenance
Attention!
Always stop the engine first and depressurize the system before
serving or repairing the machine.
To depressurize the system, you open the HP valve. If the spray
lance gun is attached you must also pull the trigger.
8.1 Daily maintenance
1.
Oil level
Check all oil levels before use. Add oil, if necessary.
If an oil level has dropped, this implies a leak in the system. In which case,
check all gaskets, couplings, and (hydraulic) pipes in the system. Immediately
repair damage and fill the system with the correct oil (
Mark!
During the settling-in period, the oil consumption of the engine
can be more than usually.
2.
a
Close the supply valve (
)
in the suction pipe.
b
Unscrew cap from the filter piece.
c
Clean the filter and concerning parts.
d
After cleaning, assemble the parts in opposite order
e
Open supply valve.
f
Check for leakage.
8.2 Weekly maintenance
1.
Cleaning:
Clean the carriage weekly. Use car shampoo and plenty of water.
8.3 Minor servicing
Minor servicing must be carried out EVERY 250 WORKING HOURS (or at least
once every 6 months) and includes the following parts of the machine:
1.
Drive
•
Servicing the engine
a
Change the oil in the engine (Super 15W40 SF CC or equivalent).
b
Renew the oil filter, if fitted.
c
Clean the air filter.
d
Renew the fuel filter.
e
Check the tension of the V-belt; increase tension, if necessary.
f
Check the condition of the battery.
Summary of Contents for MULTI JET
