42686 rev.2
12-01-12 ff
LDT-UTP
LDT-UTP
Warning
!
This tool should not be used on live electrical circuits.
It is not protected against electrical shock!
Always use
OSHA/ANSI
or other
industry approved eye protection when using tools. This tool is not to be used for purposed other than intended. Read carefully and understand
instructions before using this tool.
LDT-UTP and DDT-UTP
Drop Trimmers
46 Nooks Hill Road, Cromwell, CT 06416 USA
~
Phone: 800-528-8665
~
Int’l: (01) 860-635-2200
Fax: (01) 860-635-3631
~
E-mail: info@ripley-tools.com
~
Internet: www.ripley-tools.com
Braid Brush Feature
Enclosed separately with the LDT and DDT tools are anti-
fatigue braid brushes for the purpose of combing back
braided shielding prior to assembling connector to the
cable.
The back of the LDT tool body and bottom of the DDT tool
bodies are molded to assemble with the brush. As shown,
slide the lock tab end into the body first. Apply pressure at
the brush base to avoid damage. Snap in place.
WARRANTY: RIPLEY warrants its products against defective materials and workmanship for a period of one
year from date of shipment from the RIPLEY factory provided the product is utilized in accordance with
instructions and specified ratings.
