Mini Racer x1
Transmitter x1
Cone x20
Rollbar x1
Instruction Booklet x1
Rollbar x1
Ensure the adhesive
is on the top part
1. Slide the transmitter’s battery compartment cover towards the direction
shown and open it. Insert 4x AA batteries, ensuring you observe the correct polarity,
then replace the cover.
2. Take the optional Rollbar and form a circle as shown, ensuring the adhesive tab
is on top when the two ends meet; this ensures good adhesion with the panel
located on the underside of the car.
6~10 Minute Run times
30~40 Metre Range
2.4GHz Secure Transmission
Fully Proportional Throttle & Steering
