Risco Agility, User Manual

Agility User Manual                                                                                                  

Page 21 

Chapter 4  User Functions and Settings 

The functions and settings explained in this chapter can only be performed via your 

keypad, web browser and the Configuration Software. This chapter refers to these 

functions and settings as performed via the keypad. Refer to the Configuration Software 

manual for more information regarding how these functions and settings are performed 
via the Configuration Software. 
When using the keypad during the programming mode use the following table to be 

familiar with the functionality of the keys: 

Function 

Sequence 

Terminates commands and confirms data to be stored 

Terminates commands and confirms data to be stored 

Used to browse through the menu: Scrolls up a list or moves the cursor 

Changes data 

Numerical keys are used to input the numeric codes that may be required 

for arming, disarming, or used to activate specific functions 
 

4.1 User Codes 

To perform many of the 

Agility

 functions, a security code (often called a user code) must 

be used. Each individual using the system is assigned a user code, which, in turn, is linked 
to an Authority Level. Those with a "higher authority" have access to a greater number of 

system functions, while those with a "lower authority" are more restricted in what they 

may do. There are eight different authority levels available for users of the 

Agility

. 

Notes:

 To define the authority levels refer to your installer. 

Agility

 can support up to 32 different user codes. User codes may have variable lengths up to 6 digits. 

Your 

Agility

 was given a Grand Master Code of 1-2-3-4 during manufacturing. Unless your alarm 

company has already changed it to suit your preference, it's best to modify this code to one that is 
unique and personalized as herein described. 

Setting / Changing User Codes 

The user assigned the Grand Master authority level can change all user codes but cannot 
view the digits in the user code fields. Users with other authority levels can only change 

their own codes. The system must be disarmed in order to set or change user codes.