01/2022
Page 58
5IN2933
Disarming an Individual Partition
You can disarm 1 individual partition at a time (as fully-armed or partly-armed).
➢
To disarm an individual partition:
1.
If outside the premises, open a designated "entry" door. The keypad beeps, indicating
that the entry delay time period has started.
2.
Before the end of the entry delay time period, perform the following procedure:
NOTES:
•
If you enter your code incorrectly, three short beeps will sound.
Re-enter the code.
•
Upon disarming, a confirmation beep or squawk may sound
.
For this:
Do this to disarm an INDIVIDUAL partition:
❖
Disarm an individual partition:
Enter
code
➢
press
disarm button
➢
enter the 2-digit partition number (example 03)
➢
press
disarm button.
❖
Proximity disarm:
Place
tag
➢
enter the 2-digit partition number
(example 03)
➢
press
disarm button
NOTE:
You can select only partition
1, 2,
or
3
to disarm only that specific
partition. Other partitions cannot be separately disarmed from the
keypad.
Summary of Contents for LightSYS Plus
Page 1: ...LightSYS Plus User Manual ...