01/2022
Page 74
5IN2933
Setting Dates/Times and Activating a Vacation Schedule
This procedure is for both UO vacation schedules and arming vacation schedules.
➢
To set the date/time and activate a UO or arming vacation schedule:
1.
[For a UO vacation schedule only]:
First perform the following procedure:
UO Schedule as a "Vacation" UO Schedule
2.
[For a UO vacation schedule or arming vacation schedule]:
At the keypad, enter your
Grand Master code, and then press
OK
.
3.
Scroll to
Clock
and then press
OK
.
4.
Scroll to
Vacation
and then press
OK.
5.
Scroll to
Dates
and then press
OK;
the first vacation schedule (01) appears first by
default.
6.
Press the
disarm button
for this vacation schedule (01), or scroll to another vacation
schedule (from 01
—
99), and then press
OK.
7.
Enter a start time.
8.
Scroll to the date field and enter a date (in a
day/month
format), and then scroll to the
activation status
(Y
or
N)
and toggle to change it accordingly
–
Y activates the vacation
schedule and N deactivates the vacation schedule.
9.
[For an arming vacation schedule only]:
If you are defining partitions, perform the
following procedure now:
Defining Partitions for an Arming Vacation Schedule, page 74.
Defining Partitions for an Arming Vacation Schedule
You can define up to 32 partitions for an arming vacation schedule.
➢
To define partitions for an arming vacation schedule:
1.
Directly after you performed the prior procedure, press the
Exit button,
then scroll to
Partitions,
and then press
OK.
2.
The 32 partitions are grouped in blocks of 10. Scroll to the relevant block and then select
the partition(s) by entering the respective partition number(s). To delete a previously
selected partition, re-enter the partition number.
3.
Press
OK.
Summary of Contents for LightSYS Plus
Page 1: ...LightSYS Plus User Manual ...