ProSYS Installation and Programming Manual
173
8
Set the parameters for the UO Key #4 from the following options:
O
NONE:
The key is disabled (default).
O
AWAY:
The key is used for AWAY arming the assigned partitions.
O
STAY:
The key is used for STAY arming the assigned partitions.
O
GROUP:
The key is used for GROUP arming the assigned partitions
O
UO:
The key is used to operate a Utility Output. When selecting this option, you must
select a Utility Output:
NOTE:
Away or STAY arming can be defined as instant or delayed (Exit Delay).
9
After selecting the required option, press
/
.
10
Repeat the procedure to program the other wireless buttons.
88
11
22
Wireless Button Allocation
Default:
NONE
This procedure is required when using a 4-key wireless transmitter.
To access the Wireless Button Allocation
menu:
1
Access the Miscellaneous menu, as described on page 170.
2
From the Miscellaneous menu, press [2] to access the Wireless Button Allocation
menu options. The following display appears:
3
Use the
/
or
/
keys to position the cursor and make any
changes to the Button Number you wish to
learn-in
to the system.
4
Press
/
.
5
Select the appropriate option, as follows:
O
Press
/
or press
[1]
to move to the next button. The following display
appears:
-OR-
O
Press
/
or press
[2]
to write (or overwrite) data into the selected location.
The following display appears:
-OR-
O
Press
[3]
to erase the data in the selected location. The following display appears:
