3
Touchscreen Keypad
EN
Introduction
RISCO Group's Touchscreen Keypad is a slim and contemporary designed 7" touchscreen keypad
for the ProSYS Security System. The Touchscreen Keypad is compatible with any ProSYS version
and is available with or without a proximity reader. The Touchscreen Keypad enables to control
your security system as well as program its features.
For detailed information on programming the system refer to the ProSYS
Installer
and
User
manuals.
Installation
For
the
ProSYS
Touchscreen
installation
procedure, refer to page 2.
Indicators
Power
On
System is operating properly from AC power and backup
battery is in good condition
Off No
power
Slow Flash
System is programming
Rapid Flash
System trouble (fault)
Arm (Set)
On
System is armed (set) in Full Arm or Stay Arm mode
Off
System is disarmed (unset)
Slow Flash
System is in Exit Delay
Rapid Flash
Alarm condition
Stay/
Bypass
(Part Set/
Omit)
On
System is in Stay Arm (Part Set) or Zone Bypass (omit)
mode
Note:
The
icon is equivalent to the
icon on other ProSYS
keypads.
Off
No bypass zones in system
Ready
On
System is ready to be armed (set)
Off
System is not ready to be armed (set)
Slow Flash
System is ready to be armed (set) while exit/entry zone
remains open
Fire
On
Fire alarm in progress
Off Normal
operation
Flashing
Fire circuit problem
Tamper
On
Zone/keypad/external module has been tampered
Off
All zones are operating normally
Proximity
Flashing
Indicates that the keypad has a proximity reader
