RISE VUSION FPV RACER, Instrustion Manual

5

SETUP

The VUSION FPV RACER is completely assembled. All the bolts have been set to 

the proper torque and have thread locking compound applied where needed to 
keep them secure.

FPV ANTENNA

Always attach the FPV VTX antenna before connecting the battery to the Vusion. 

If the quadcopter is operated without the FPV antenna, the VTX could be damaged.

BATTERY CHARGING

Plug the AC wall adapter into a 120V outlet and 
connect the balance charger to the wall adapter. The 
power LED will illuminate solid RED. Plug the white 
balance plug on the battery to the 3S port on the 
charger. When charging, the charge status LED will 
illuminate solid RED. When charge is complete the 
LED will change to solid GREEN. Typical charge time 
of a depleted battery is approximately 2 hours.

NOTE:

 A blinking red charge status LED indicates a 

charging error.

●

NEVER

 leave the battery unattended while charging.

●

ALWAYS

 unplug the charger from the outlet and the battery when charging 

is complete.

●

 NEVER

 charge a puffed or damaged battery.

NOTE:

 It is normal for the charger to get warm during the charging process

BATTERY INSTALLATION

Pull on the edge of the battery 
tray cover to unsnap it from the 

Vusion’s frame

Remove the cover and install 
the battery. Tuck the balance 
plug down next to the battery 
and replace the cover.

Pull