11
VIDEO SYSTEM SETUP
The optional camera (RISE2508)
is designed to fit the camera
mounting plate without any
modifications.
The camera is designed to operate
on just 5 volts. The red and black
wires should be connected to a
receiver port to power the camera.
Warning- check the polarity of the
camera connection before connecting
the flight battery to the RXD250. The
camera will be damaged if the
polarity is backwards.
The Tactic 200mW FPV transmitter
(TACZ5005) is recommended. It can be easily connected to the 12 volt
connector at the back of the RXD250 and has additional cables that make
connecting the optional camera a simple task.
MOTOR ARMING & TAKEOFF
Turn on the transmitter and connect the flight battery to the RXD250.
Place the quadcopter on a level surface and let it sit for 10 seconds to
let the flight controller set up the gyros.
Arm the motors by holding the yaw control to the right for at least 3
seconds, and center the left stick. Advance the throttle to start the motors
and take off.
To disarm the motors, bring the throttle down to 0% and hold the yaw
control to the left.
FLYING
The RXD250 is a racing quad. As such it is capable of flying at high rates
of speed and can get out of sight very quickly. We recommend flying the
quad in stability mode without FPV for several flights until you are fully
familiar with how this quad handles.
As your skills grow, try Rattitude mode. When flying in this mode, let go
of the right stick if you find yourself in trouble. The quad will level itself
and become stable.
FPV RACING WEBSITES
More information about FPV racing can be found at sites like multi.com
and fpvracing.tv
FPV Camera
FPV Transmitter
