5
CONTENTS
●
RXR Rise RXD250
●
Spare Props
●
Hook & Loop pads for the
battery
FLIGHT MODES
The RXD250 has three flight modes.
Stability Mode
has limits on the
tilt angle and the quadcopter will
level itself when the right stick is
centered.
The Rattitude Mode
will center
the quad and limit the tilt angle when the right stick is near center. When
the stick is moved away from center, the limits are removed making the quad
much more maneuverable. Flips are rolls are easily done in this mode.
Rate Mode
is available for experienced pilots that want maximum
maneuverability. In this mode, the quad will maintain its current pitch or
heading when the right stick is released. The quadcopter’s flight will be
smoother and more responsive in this mode.
SETUP
The RXD250 needs only minimal assembly. All the bolts have been set to the
proper torque and have thread locking compound applied to keep them secure.
PROPELLERS
The propellers are counter rotating
and must be installed correctly or
the quad will not fly. When
installing or replacing propellers,
make sure you install the correct
prop on the correct corner. Note
that two of the motor shafts and
nuts are “reverse” threaded.
CW= clockwise rotation when
observed from the top.
CCW=counter clockwise rotation
when observed from the top.
Receiver
Mount
FPV
Transmitter
Mount
Antenna
Mount
Antenna
Mount
HD Camera
Mount
CW PROP
“Reverse” Nut
CW PROP
“Reverse” Nut
FRONT
CCW PROP
“Normal” Nut
CCW PROP
“Normal” Nut
