7
FLIGHT CONTROLLER SETUP
Download the Librepilot Ground Station app (GCS) from
www.librepilot.org
from the software downloads section.
To set up your transmitter using the GCS app, you will need:
A.
A mini-USB cable to connect the cc3d controller to the GCS app.
B.
A charged flight battery.
C.
The transmitter set up with the new model and linked to the receiver.
Open the GCS app and connect the RXD250 with your mini-USB cable.
When the communication window shows that the flight controller is connected
to the GCS app, click on the configuration button.
