7
Download the latest settings file for the RXS255 from http://www.explore-rise.com
Open the File menu in LibrePilot and
click on “Import UAV settings” to load
the settings file. If an Entry Point error
pops up, click OK until a window
opens to select the file to be loaded
onto the flight controller. Select the
settings file. When the Import Summary
window opens, c lick on the “Save to
Board Flash” button to load the file
onto the flight controller.
Click on the hardware button
on the left side of the screen.
The Receiver Port setting
should be “PP
OneShot”.
Click on the Input button on the left side of the screen. After the Flight Controller
has been configured to use your transmitter, this Input screen should be used verify
that all the controls are operating correctly. If the flight controller has not set up
with this transmitter/receiver
or if any of the indicators are
not responding, click on the
Transmitter setup wizard
button and follow the steps
to set up the transmitter.
