10
Open the File menu
in LibrePilot and
click on “Import UAV
settings” to load the
settings file. If an
Entry Point error
pops up, click OK
until a window
opens to select the
file to be loaded
onto the flight
controller. Click on
the “Save to Board
Flash” button to load
the file onto the
flight controller.
If you have a PWM
r e c e i v e r, n o
hardware settings
will need to be
changed. Please go
the Flight Controller Input section.
If using an S-Bus or DSM type receiver, the receiver cable should be plugged into
the Main Port and the appropriate receiver type (S.Bus or DSM) should be selected.
When the settings have been changed, click the Save button and cycle the power
for the CC3D controller.
