6
FLIGHT CONTROLLER INSTALLATION
When installing the Flight Controller
(FC), be sure to orient the case so
the
Mini USB Port
is facing the rear
of the quadcopter. Apply the
mounting tape to the bottom of the
flight controller and place it at the
center of the frame.
The 4 ESC wires need to be plugged
into the Output ports 1–4 on the
FC. Refer to the following photo to
identify the correct cable for each
port. The brown wires for the plugs
should be in the “-“ column at the
edge of the FC.
The 5V power cable should be plugged into Output port 5 or 6 with the brown
wire in the “-“ column.
Flight
Controller
Mini USB Port
Main Port
