5
FEATURES
●
Entry Level 120 class indoor
racing quad
●
Ready to Fly, no building required
●
Wall Guards to increase stability
●
Flip Button
●
Flight Controller is pre-
programmed with two stability
modes and a rate mode
●
600TVL FPV Camera
●
25mW VTX
DIMENSIONS
Size:
120 mm (4.7 in) diagonally motor to motor
Width:
165 mm (6.5 in)
Length:
165 mm (6.5 in)
Height:
52 mm (2.0 in)
Prop:
58 mm (2.3 in)
Empty Weight:
51.7g (1.82 oz.) without battery
SETUP
The VUSION HOUSE RACER is completely assembled. If you have the FPV RTF
version, please read the manual for the FPV monitor before setting up and flying
the House Racer.
Battery Charging
Plug charger into USB port or AC adapter
(DIDP1125 not included) as shown and
connect the battery. The red LED will flash
slowly while the battery is charging. The LED
will be steady when the battery is fully charged.
●
NEVER
leave the battery unattended while charging.
●
DO NOT
allow the USB port to power down while the charger is connected
to the battery.
●
ALWAYS
unplug the charger from the USB port and the battery when
charging is complete.
●
The battery connector will only fit in one way.
●
For best results use a USB source that is 1 amp or greater.
Battery Installation
Slide the battery into the battery
tray on the bottom of the frame.
