7
V 1.0
Jumper Setting :
CF Socket Master/Slave select : (JCFSEL1) and BIOS setting.
IDE1 (for connect to Slim CDROM) and CF socket use the same IDE port,
When system install slim CDROM and its jumper setting is master,
CF socket must be slave (JCFSEL1 = 2-3 short).
Battery for CMOS : (JBAT1)
Power Switch Option : (J1 and SW1)
JCFSEL1
1-2 short
CF is Master
2-3 short (default) CF is Slave
BIOS Setting
When use CF card, please press
[Ctrl] +[Alt] + [Del] into BIOS setup and
move to [Integrated Peripherals] =>
[VIA OnChip IDE Device] =>
IDE DMA transfer access = [ Disabled ]
JBAT1
1-2 short (default)
Normal
2-3 short
Clear CMOS
IDE 1
J1 and SW1 are power switch function,
the same with power button on plastic
front panel.
Summary of Contents for RS-2917 series
Page 6: ...vi V 1 0 Appendix 3 Product warranty 33...
Page 7: ...vii V 1 0...
Page 42: ...Model Name RS 2917...