东方日升新能源股份有限公司
PV module installation and
maintenance manual
RISEN ENERGY CO.,LTD.
主导部门：组件研发中心
Page：NO.12 ,Total 41
the installation of any roof modules must be sealed to prevent leakage and to
ensure the fire rating levels. The accumulation of dust on the modules surface will
impair the performance of the modules. During the installation, the module tilt angle
should be maintained at more than 10° to allow the rain to wash away the dust,
while the module with too small tilt angle requires more frequent cleaning.
Please do NOT operate any devices at the place where is closed to the flammable
gas.
5. Unloading, Transportation and Storage
5.1. Markers on outer packaging
Discarded at will of the
module is forbidden and
require special recycling
Modules shall be kept dry,
NOT exposing to the rain or
moisture.
Modules in carton are fragile,
which shall be handled with
care
The number of stacking
layers depends on the
product packaging labels
The
packaging
shall
be
transported upright.
The packaging material can be
recycled.
